Cosmos XZQ10

Xilinx® Zynq® 7030/7035/7045 System Board

Cosmos XZQ10 System Board Cosmos XZQ10 System Board (Front)
Cosmos XZQ10 System Board (Back)


The Cosmos XZQ10 system board combines Xilinx's Zynq-7000-series All Programmable SoC device with fast DDR3L SDRAM, eMMC flash, quad SPI flash, Gigabit Ethernet, dual Fast Ethernet, PCIe, a QSFP+ slot (optional 4x SFP+ slots), up to two FMC HPC connectors and 4x USB 2.0 and thus forms a complete and powerful embedded processing system.



  • Built around Xilinx's Zynq-7000 All Programmable SoC
  • Combines the flexibility of a CPU system with the parallel processing power and real-time capabilities of an FPGA system
  • Offers PCIe® Gen2 x4/x8, USB 2.0, USB-C 2.0, Gigabit and dual Fast Ethernet interfaces
  • Available in industrial temperature range
  • 166.4 × 111.2 mm form factor
  • Linux BSP and tool chain available


  • High-bandwidth memory – independent PS and PL channels are ideal for most applications
  • A powerful PCIe Gen2 x4/x8 interface provides high-speed data I/O at low integration cost
  • Low-latency networking Gigabit Ethernet interface provides fast networking capabilities
  • Dual Fast Ethernet PHY for Industrial Ethernet


  • Xilinx Zynq-7000-series SoC FPGA
    • ARM® dual-core Cortex™-A9
      (32 bit, up to 800 MHz)
    • Xilinx Kintex®-7 28nm FPGA fabric
  • 168 total user I/Os
  • 1 GByte DDR3L SDRAM (PS)
  • 256 MByte DDR3L SDRAM (PL)
  • PCIe Gen2 x4/x8
  • 16 GB eMMC flash
  • 64 MB quad SPI flash
  • Gigabit Ethernet and two Fast Ethernet
  • USB 2.0 PHYs
  • QSFP+ slot, optional 4x SFP+ slots
  • System controller with built-in JTAG and UART via USB
  • Low-jitter clock generator
  • 12V single supply voltage

System Board Architecture

COSMOS XZQ10 System Board ArchitectureClick image to enlarge

Product Selection Matrix

Product Code FPGA 4x SFP+ Connectors FMC HPC Connectors DDR3L SDRAM (PS) DDR3L SDRAM (PL) Temp. Range Status
CO-XZQ10-111-I XC7Z030-2FBG676I 1 (top) 1024MB 256MB -40..+85°C else
CO-XZQ10-330-I XC7Z035-1FBG676I 1 (top) 1024MB 256MB -40..+85°C no match
CO-XZQ10-740-I XC7Z045-2FFG676I 2 (top and bottom) 1024MB 256MB -40..+85°C no match
Custom Configurations Click to view custom configuration options

Click on table to enlarge. FMC connectors aren't ANSI/VITA 57.1 compliant.

Key: in-stock In stock limited-quantities Limited quantities available-soon In production contact-us Contact us

Minimum order quantities apply for custom module configurations. Please contact us.


Show prices in: EUR USD CHF

Product CodeMinimum Order Quantity1EURUSDCHF

Click on table to enlarge

1: For non-preferred configurations, the minimum order quantity (MOQ) only applies if the modules are not in stock – please get in touch for more details.
All prices are non-binding estimates – please use the enquiry form or contact us for definitive pricing and lead-time information.

Accessory kits

Add an accessory kit to have everything you need ready to start your project - just select the relevant accessory kit option when ordering.

Accessory kit pricing:

Product Code Contents EUR USD CHF
ACC-BASE-USB2.0 Power supply, micro USB 2.0 cable 15 15 16

Operating System Support

OS Details Availability Partner



Available now Antmicro

Target Applications

  • Embedded Computing
  • Data Acquisition
  • High-Speed Communications
  • Drive/Motion Control
  • Digital Signal Processing
  • Image Processing

Related Products

  • Universal Drive Controller IP Core more



Support and Further Information

Information contained on this web page is subject to change without notice. Actual product may differ in appearance from images shown on this web page.